My Lawnmower Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
hey! i have a toro xl30h ride lawn tractor. I cut grass for a about a half hour then the blades suddenly disengage. i put the blade engage button back in then try to re-engage the blades and i get nothing. if i let the machine cool and try again the blade re-engage properly. just wondering where i should look to try and fix the issue. Thanks
 

·
Founding Administrator
Joined
·
1,256 Posts
Check for a loose wire connection going to the blade clutch, along with a good connection to the ground wire coming off the clutch, if so equipped. I ran into this situation with a JD I had. Come to find out, not only was the small ground wire loose (connected to the frame/engine with a bolt that attached the engine to the frame), but the whole engine was loose as well.
 
1 - 3 of 3 Posts
Top