My Lawnmower Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I found this lawnmower discarded on the roadside. I was able to get it started, but it dies after 2-3 second which indicated the carb issue (which is to be addressed later) The pull cord is in a pretty bad shape as well as the rest of the recoil mechanism that tends to stick and not recoil every time it gets pulled.
I spent some time searching the web how to approach the repair of the recoil mechanism, but I found nothing specific about this particular lawnmower/engine combo.

The cord pulley seem to be held in place by two tabs. What happens if I bent the tabs outwards and try to remove the pulley? I can see the spring behind the pulley, and I'm afraid if the whole thing gets unwound I won't be able to put it back together

I appreciate any help/info that can get me started on repairs


62031
62032
62033
20210615_223130.jpg
20210615_223159.jpg
20210615_223257.jpg
20210615_223130.jpg
20210615_223159.jpg
20210615_223257.jpg
20210615_223130.jpg 20210615_223159.jpg 20210615_223257.jpg
 
1 - 1 of 1 Posts
Top