[dgolfnut]

Have a gravely 10a with electronic ignition and Kohler engine (I bought it used 35 years ago-great machine). Started being hard to start but eventually would. Replaced plug and plug wire - starts one week. Next week - no start again - No spark. Replaced coil. Still no spark. Pulled all connectors I could find and re-seated. Not sure how to diagnose further with electronic ignition. Any ideas?

 

[Five Points]

Welcome to the forum dgolfnut! We'll see if one of our Gravely guys will jump in who's experienced this problem.

 

[themidniteryder]

:howdy: Welcome to MLF. 35 years+...should have points and condenser in addition to the coil. I would clean and set the points, possibly replace condenser.

 

[freginold]

If you're looking to get new points and condenser, or anything else, you can get the parts list here:

http://www.oldgravelys.net/pdf/Com_10A_12_IPL_0470.pdf

 

[Five Points]

If you're looking to get new points and condenser, or anything else, you can get the parts list here:

http://www.oldgravelys.net/pdf/Com_10A_12_IPL_0470.pdf

:bag: I might of missed the engine parts, is this the correct PDF? :dunno:

 

[bwdbrn1]

My '74 Suburban with an Onan 16 horse acted like it didn't want to start some times, and I traced it down to the connection at the starter that had gotten loose.