My Lawnmower Forum banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
1,140 Posts
Hello and Welcome to MLMF, bigkahuna!

I'm sure no expert but it sounds as though you may have a safety switch problem. Either the brake blade, seat switch or ignition position switch may have a bad or broken contact. If you have a volt/ohm meter you can put your key to the ON position and trace the leads one by one.

Some people may suggest using a jumper wire or other device to bypass these switches....I don't recommend doing this! They can be a real pain in the butt (the switches not the people:)) , but they are there to protect you and loved ones. Good luck!

Mark
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top