My Lawnmower Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
i have a lt133 the deck belt seems to be to long. engagement adjustment at the very end of adjustment. it has a brand new oregon belt 75-299. johndeere belt on order but not sure that is going to solve the problem. when engage belt is snug but not as tight as i would expect. checked all pulleys no wiggle in them and they spin freely. any thoughts. what am i missing grrrrr
 

·
Administrator
Joined
·
6,224 Posts
Specs I found for both on the net:

Oregon 75-299 Length 114.5" Width 0.5"

Deere M126536 Length 114.247" Width 0.559"


The Deere belt by those numbers is roughly 1/4" shorter plus 1/10" wider which will make it sit a smidgen higher in the pulleys. Both of those added together should help to make it tighter.
 
1 - 2 of 2 Posts
Top