My Lawnmower Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
Looking for this assembly

The carb linkages thermostatic spring and all the bits.

Reason, working on a remote start for a Champion clone I would prefer this combo because of the vacuum pull off.

If you have this engine and its scrap I flywheel too..
I better stop adding stuff postage is going to kill me ha ha

 

·
Premium Member
Joined
·
1,026 Posts
be aware you will also need the muffler. imo its not worth putting the kind of money its going to cost you in to a push mower engine, also, that system is unreliable(ask me how i know!)
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #3 ·
be aware you will also need the muffler. imo its not worth putting the kind of money its going to cost you in to a push mower engine, also, that system is unreliable(ask me how i know!)
Actually its a Champion GX200 clone generator engine, with Honda internals and a Loncin flywheel and electric start kit.
Its going to be bolted to PM alternator with Arduino acting as the engine governor and management system.

What I am doing is a long way away from a lawn mower.
I do not need the muffler because I have my own exhaust to build around it it anyways.

I am aware its not a good system, but I think I can fix it.
The system work better, the lack of adjustment is the problem.

So if you have this on a stiff sitting in the back yard you would be doing me a favour.
 
1 - 3 of 3 Posts
Top