My Lawnmower Forum banner

Lawn Boy ignition coils

2552 Views 3 Replies 3 Participants Last post by  AndyK
Will the coil from a #10201 work on a # S21ZPM?

I can't find a good cross reference and most parts diagrams are incomplete.


1 - 4 of 4 Posts
No, the F and V series coils won't interchange. Sorry.
AndyK--Have you tried "baking" the bad coil? Loosely wrap it in tin foil and put it in the oven at 200 deg for about an hour. If there is moisture causing the problem, this will remove it. Lots of folks have good success with this, some marginal, but worth a try.
baking coils

Thanks Brad I will try that!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.