My Lawnmower Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
I don't have any charging on my john deere 170. Have approx 18 vac off stater and 12 vdc off reg red wire I'am assuming this is feed back from bat. the red wire gets very hot and has melted plug. Tried different reg. nothing. I have replaced ign. switch off of ebay they claimed to be a replacement. could this be a problem. Traced out everything else and no shorts. Also when the 2 wire plug is on the PTO switch it will kill the motor when engaging PTO. Need to run mower with that plug off. have checked all safety switches.
Thanks for looking
Steve
 
1 - 2 of 2 Posts
Top