My Lawnmower Forum banner

Help with JD 180 manual transmission

2406 Views 2 Replies 2 Participants Last post by  TMR
I am having a problem with the manual transmission on my JD 180. All the forward gears are fine. When shifting into reverse it seems like the gears are not fully engaged. If you don't hold the shift lever it will pop out of gear. If I set the engine speed to low it works fine. The drive belt is fully stopped when the clutch is in so the transmission input pulley is not moving. Is there any way to adjust the shift lever to more fully engage the reverse gear or is this a problem internal to the transmission? worn reverse gear?
Any help would be appreciated
Tom
1 - 2 of 3 Posts
Mark

Great advice, thanks!

I have plenty to go on now. Looks like I will be taking the transmission apart at the end of mowing season.

Thanks again.

Tom
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top