My Lawnmower Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
if you can take the bracket off and get at the trunnion that goes up and down on the screw you may have bottomed it out to the end of the screw and it needs to be loosened up. It might be a left hand thread but just try and break it free being easy on it turning it one way or the other and then try and see if it turns once it is loose before you piut it back together.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top