[bwdbrn1]

View attachment 62947 View attachment 62947 View attachment 62948

i have replaced the 7.5 amp fuse holder and solenoid. i have 12 volts fron the battery to the starter cable on the right side of solenoid but nothing from the battery to the left side of the solenoid. solenoid wont click and it wont start. hopefully someone else on here has had the same issue.
and the igniton switch is good because i tested it.

DR might just have an electrical diagram available if you search by the model number of your mower.

 

[bwdbrn1]

appreciate all the help.
crazy thing. i pulled the solenoid back off, took my grinder and took off the paint where it bolts on and it started right up.

A frustrating experience with a satisfying ending!