My Lawnmower Forum banner

Damsel in Distress! (Great Dane mower with B&S engine)

1842 Views 4 Replies 3 Participants Last post by  Randall
I was searching google trying to help my frantic husband solve a problem and found you all. He has a Great Dane Scamper Hydro with a 16 hp B&S engine. The PTO clutch bolt and washer are missing. I don't know what any of that means, but I took notes when he was telling me what was wrong......Does anyone know what size he would need to replace it or have any suggestions to help at all? Thanks!
1 - 5 of 5 Posts
Hi, and welcome to MLMF. Your husband is truly a luck man to have a wife thoughtful enough to try to get that information for him.

I don't know if this is the correct parts diagram for your mower, but it was the first one I found looking for Great Dane Scamper Hydro. Perhaps it will help.

Good luck, and let us know if how it goes for you.
Thank you! I really appreciate your response. The problem with this manual is that he has the 16 hp B&S engine. We're looking at craigslist to see if we can't find a new mower...
Yeah, I took a shot at it as it was the first real good exploded diagram parts list I ran across. Don't know if the site that came from might have more available, or maybe a call to them might get you the information you need.
Reading over this " link " The 16 hp and 18hp use the same bolts so I would assume it would be your 7/16x3 bolt just my 2cents.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.