[bones774]

Hi, this is my first post here and appreciate any help.

My 782 pto has been turning on/off intermittently when i put the switch on. I replaced the switch and the same thing happens, now i tested both switches and they both work. I jumped the switch with a wire to get the grass cut so the electric clutch does work but what else should i look for. Thanks

 

[Mark / Ohio]

I found a diagram but don't know if it falls within your serial number range or not.

http://www.cubfaq.com/wiringdiagrams/782.jpg

When you jumped out the switch, did you jumper directly the two wires (A,B) connected to the switch or did you feed the 12 volts from another location into the clutch?

Reason I ask is I'm wondering if you could have a bad connector on one of the two wires.

 

[bones774]

I jumped between the two wires, i have the lower serial number machine.
thanks